Frequently Asked Questions
Frequently asked questions about screw compressor selection, installation, maintenance and the quotation process, with short, clear answers. If you cannot find what you are looking for, write to us from the contact page.
General
What is a screw compressor?
A screw compressor is a rotary compressor that compresses air with two meshing screws (rotors). Because compression is continuous, it is widely used in factories for an uninterrupted compressed air supply. SpeedAir manufactures fixed speed and inverter-controlled (VSD) screw compressor models; the power range of each series is listed on the product pages and starts at 7 kW.
What is the difference between a screw compressor and a piston compressor?
A screw compressor compresses air continuously with rotating screws, while a piston compressor compresses it intermittently with the back and forth motion of a piston. For this reason a screw compressor generally runs more quietly and is better suited to long, uninterrupted operation. It is a common choice for plants where air demand lasts all day; the SpeedAir product range consists of screw compressors.
When is a VSD (inverter-controlled) screw compressor preferred?
A VSD (inverter-controlled) screw compressor is preferred in plants where air consumption changes during the day. The inverter adjusts the motor speed to the instantaneous air demand, aiming to keep the compressor from producing more air than needed. If demand is steady all day, a fixed speed screw compressor can also be an economic option. SpeedAir offers V (poly belt), direct coupled and A+ Plus inverter-controlled series.
How do I choose the right kW and flow rate?
To choose a compressor, first determine the plant's air demand (m³/min) and line pressure (bar), then select the motor power (kW) accordingly. For example, according to the SpeedAir datasheet the 7.5 kW S7 model delivers 0.97 m³/min at 10 bar; the flow rate falls as pressure rises. You can request a flow meter measurement and a site survey to find the right model.
Why are an air dryer and filters needed?
Moisture and oil vapor in compressed air can damage line equipment and production quality, so an air dryer and filters are recommended at the compressor outlet. SpeedAir refrigerated dryers are rated for a +3 °C dew point and chemical (desiccant) dryers for a -40 °C dew point. Chemical dryers are preferred for sensitive production lines and laser cutting applications.
How do I choose an air tank?
An air tank balances pressure and reduces how often the compressor switches between load and idle; its volume is chosen according to air consumption and compressor power. SpeedAir tanks are made horizontal or vertical, from 100 to 20,000 liters and for 10, 16 and 40 bar; the design codes are AD 2000, EN 13445 and ASME VIII Div.1. Tank-mounted compressors use 500 and 1000 liter tanks.
How are screw compressor maintenance and spare parts handled?
Screw compressor maintenance is carried out periodically; the interval is set according to the manufacturer's manual and operating conditions. Maintenance includes oil and oil filter, air filter and separator replacement and a check of the inverter (VSD). SpeedAir supplies spare parts including air, oil and separator filters and compressor oil.
Can the waste heat of a compressor be recovered?
Yes, the waste heat of a screw compressor can be used for hot water production or factory heating. A heat recovery system makes use of the heat the compressor releases while running; the application is planned according to the heat demand of the plant. Heat recovery lets the heat the compressor produces serve a second purpose. We can define the heat recovery solution suited to your plant together at the quotation stage.
How are installation and commissioning carried out?
During installation the compressor, air tank, dryer and filters are connected to suit the line pressure, and then the system is commissioned. In its completed projects SpeedAir reports pressure tests, leak tests, and performance and flow measurements. You can clarify the installation plan and commissioning scope for your own plant during the quotation.
How do I get a quote and how is the price determined?
The price is determined through the quote form; the price of a screw compressor varies with motor power (kW), operating pressure (bar), capacity and options such as an inverter (VSD). You can describe your need by filling in the form on the contact page or using the quote link on the product pages; our team will get in touch with you. Stating your compressor power (kW) and pressure (bar), or your air demand (m³/min), speeds up the process.
What does technical service cover?
SpeedAir screw compressor service covers periodic maintenance, fault diagnosis and repair, oil, filter and separator replacement and screw block overhaul. The service is provided across Turkey, primarily in Istanbul. You can send your service request through the contact form, by phone or on WhatsApp. Sharing the fault symptoms and the compressor model makes diagnosis easier.
How do ordering and delivery work?
An order starts when the quote is approved; delivery time and terms are clarified at the quotation stage. The quote lists the model, power, pressure and, where applicable, complementary equipment such as a dryer, air tank and filters. For current delivery information you can use the form on the contact page or talk to our engineering team.
Why is compressed air management necessary?
It is necessary to reduce production costs, save on high electricity bills and keep clean air flowing without interruption on production lines.
What is the biggest energy loss in compressor systems?
In industrial plants the biggest losses usually come from air leaks in the lines, incorrect pipe diameters and pressure set higher than needed.
Who are SpeedAir compressor systems suitable for?
They are ideal for all production and industrial plants that need uninterrupted, highly efficient compressed air, especially laser cutting, metal processing, automotive, textile, plastics, food and packaging.
Still have a question?
Last updated: